With the start of Episode 6, Act 10, Lotus was introduced to Valorant as the only other three-site map aside from Haven. Whenever new maps are released in a game like Valorant, professional gamers all throughout the world rush to figure out the new setups and lineups for every possible agent, and maybe even the ones that don’t require lineups!
However, one agent that does require you to know your setups is Killjoy. With her arsenal of super-tech Nanobots and Alarm Bots, she’s one of the most efficient characters when it comes to securing a site or playing post-plant. But knowing how to play her will require you to have some map knowledge and most definitely where to put down her abilities for the easiest victories.
That’s why we picked a map like Lotus, where we know people struggle a lot with covering all three sites, as a guide on how to set up Killjoy. She is definitely one of the strongest characters on this map, and even more so once you know how to take advantage of her abilities properly.

Defending A-Site Setup
Starting off with the A-site, this is where Killjoy is the strongest and where you should play her the most. Despite the long and winding entry to the site, the planting area itself has a lot of short angles and chokepoints where her Nanoswarm and Alarm Bot can shine, securing you several easy kills during retake.
To start off, the best place for her Turret is behind this convenient box. You might think that the better place to put it is on top of the structure, but it’s very easy to shoot it off from there and gives scarce information.
Instead, placing the Turret here means enemies will have to look behind them to shoot it, allowing you or one of your teammates to play off of the Turret and take an easy peek for the kill. Even if they don’t shoot it, you’re still getting information of them entering the site, signaling your entire team for a quick rotation.
Next, we have the Alarm Bot, which we recommend placing on this spot near the default plant-site box. The important thing is to place it so that it covers the entire area, including the specific corner shown on the image.
Following up the Alarm Bot, we’ll be placing Killjoy’s Nanoswarm on this sneaky place right on top of the base of the pillar. The elevated positioning will throw off enemies as they’ll always expect your molly to be on the ground.
The second molly, we’ll be putting right beside the default plant-site. This setup is simple enough and will catch anyone that tries to rush into the site, oftentimes not even requiring you to shoot them, as your mollies will do enough to lethally damage them.
Another molly set up you can do is by placing the second Nanoswarm near the ropes as shown above. This will make sure that no one gets access to the back of the site and also do plenty of damage on the way there if they dare try to.
When playing this setup, we recommend staying behind the site itself so that you can safely watch the trees and let your super-sweet tech handle anyone that comes through A Main.
Post Plant A-Site Setup
Killjoy is arguably the best agent on Valorant right now when it comes to playing post-plant, simply because of how much information and damage she can do even without being on the site actively.
And so, we can’t make a Killjoy set up guide without talking about the post-plant set ups for Killjoy on all the different sites of Lotus. So let’s start with A-site.
We recommend practicing this Nanoswarm lineup so that you can execute it as fast as you can after planting. The first step is to stand with the thick line on the center of your screen, which is on the box-like structure near A Main’s entry.
Next, stand in the place where the blue ping is, as shown on the image above. This is basically where the green grass meets the gray colored ground. Make sure that the thick line is still in the center and look above to the sky.
Aim up at the sky and place the camera in a way so that the small diamond above the right mouse button icon lines up with the middle of the leaf, as shown above. If the reference is confusing, check out the zoomed in image shown below.
Now simply throw the molly without any jumps and your Nanoswarm will go straight on top of the box on default plant. The placement of the molly covers both the left and right side of the box, damaging anyone near it and wasting enough time for the spike to detonate by then.
Defending B-Site Setup
The B-site of Lotus is the one where Killjoy gets the least action, with very little options for Nanoswarm placements or her Alarm Bots. Regardless, if the enemy keeps pushing B site, you’ll be forced to set up there as a precaution.
The best place to put Killjoy’s Turret is on the small corner near the default site, as you can see above. That way, anyone who tries to peek from B main will get distracted while you can secure a kill by camping in the usual box beside the entry site. But don’t do that every round because it can get predictable and the enemy can just wallbang you easily.
The best place for the Alarm Bot is to simply use it on the corner, which will catch any enemy players entering the site from B Main. It’s a pretty simple position, just make sure to use it in a way that it covers the entire area.
The other effective place for Killjoy’s Alarm Bot is near the breakable door connecting A and B. Pairing that up with a Nanoswarm molly can even secure you a kill or two in the game.
Now, for the Nanoswarm bots, the set up is, again, quite basic and nothing fancy, since no one really plays B that much anyway. But an effective way to use both of them can be seen in the image above.
Detonate the mollies as soon as you hear your Alarm Bot going off, and this will make sure that the enemies can’t get in at all, as it will cover the entire entry area including the default plant site.
This is an extremely easy way to play Killjoy on B site, and you can simply relax at the back of the site until you hear your Alarm Bot go off. Then you can detonate both the mollies, which will give the entire team enough time to rotate and even give you space to peek them while they’re busy getting away from the Nanoswarm damage.
Post Plant B-Site Setup
There really isn’t much options for post plant when it comes to the B site, but again, the best way to play post plant is simply to put down the spike on default and set up this molly on top of the box so that you can cover both sides of the box with one Nanoswarm.
You can also place the turret here so that it can watch both A Link and B Upper, letting you know once an enemy is here so that you can play off the turret for a possible kill. But it’s better not to do this if there’s more than 2 or 3 enemies as you can get easily overwhelmed if they coordinate their attacks.
Defending C-Site Setup
C-Site is the other area where you’ll mostly be playing as Killjoy, as the site itself is quite small with a lot of chokepoints and short angles. This means you can easily take leverage of your Nanoswarms and reduce the effective area in which the enemies can play off of.
For your Alarm Bot, place it on the main entry to C site, and place it as far back as possible while making sure both corners are still covered.
Now place the Nanoswarms near the Alarm Bot and one near the ramp so that any Jett or Raze that might wanna give a fast entry will get caught in the Nanoswarm as well.
As you can see here, this blocks off quite a bit of the entry to C and also makes sure enemies will be damaged if they dare to dash or satchel during their entry. The best angle to play with this setup is to stay on the back of the site and watch the right angle towards the ramps so that you can easily pick off any enemy that might walk through your Nanoswarms and peek you with one health remaining.
The other Nanoswarm set up you can do is by putting one of them on the corner, where people usually plant default, and another near the pillar, so that enemies will get damaged even if they try to crouch underneath the elevated molly and also get their access denied thanks to the molly near the box.
This will force enemies to stay near the small box on the corner of the site or deny complete access to the site, giving your other teammates time to give you backup and rotate.
There are two optimal spots for the Turret, and one of them is on top of the small box near the entry to C site. This is a very simple and effective position for the Turret, as they will have their backs turned to shoot the turret while you can get an easy peek from the back of the site.
The next spot is by putting your Turret on the only other small box on C, which is near the back of the site. This not only catches people taking entry but will also shoot at people walking towards the ramp. This is a very effective placement for the Turret and quite secure too, as the enemies can’t easily take out the turret without being extremely vulnerable.
Post Plant C-Site Setup
One of the best lineups for Killjoy we’ve seen is the one we’re about to show you, with the credits going to CaMbCaMb on YouTube. This one’s not that hard to do but it’s highly recommended for you to practice this on a custom match, as you should with almost all lineups!
So the first thing to do is to look straight into the wall shown on the image above, with the crosshair lined up with the vertical line. Hug the wall, then look at the wall of the cliff on your left.
Now line up the small diamond on the top of the right mouse button icon under the leaf, as you can see on the image. As usual, if you can’t tell the reference, take a look at the zoomed in image we provided down below.
This can be quite tricky to get right the first few times, but nothing that can’t be done with enough practice. What you have to do once you line it up is press space to jump and IMMEDIATELY left click to fire the molly. The timing for the two inputs are almost instantaneous but you have to press left click as fast as you can right after jumping.
This extremely effective lineup will land your Nanoswarm right on the spot where you plant default spike, covering the entire area with very little place to back away from. It’s super useful and can catch enemies completely by surprise as they try to defuse the spike.
However, make sure to tell your teammates beforehand to plant somewhere in that area, otherwise using this lineup simply will not make sense at all. Always remember to keep comms clear!
Killjoy Ultimate Spots for Retake
Now we’ll be taking a quick look at the best spots for Killjoy’s ult during retake, on all three of the sites in Lotus. Killjoy’s ult can quickly turn around the round to your favor, and with most of these ultimates, you can even go as far as to safely defuse/half defuse the spike as the ultimate goes through its duration.
C Site Lockdown (Retake)
The first spot we’ll be taking a look at is the spot for your Lockdown on C Site. Place it right on this corner on Waterfall so that it will cover the entirety of C Site and most of C Main, forcing the enemy to fall back entirely thanks to the massive radius this ultimate covers.
B Site Lockdown (Retake)
The best spot for initiating Lockdown is on C Link by putting it on the corner shown above. This is a very basic spot for Killjoy’s ult and covers the entire B Site. The only thing you need to keep in mind is to watch B Main for the quick peeks that the enemy might make before rushing out of the radius when there’s a few seconds left.
The same goes for A Link as people can peek from that angle and quickly rush back before the Lockdown runs out. So make sure you have a teammate watching that if possible.
The other place you can put down the ultimate is on B Upper, positioning it to the left of the doorway. You can also put it down on the corner on the right, but getting there can be unsafe and it’s harder to break the ultimate if you put it on the left side.
The only place it won’t clear out is the small section in C door, so you can expect to find an enemy or two lurking there, which can be easily cleared out with a coordinated attack from your team.
A Site Lockdown (Retake)
As for the A Site, the best spots include the one on the corner in A Stairs, as it will cover almost all of A Site, including Trees. But do note that this can be wallbanged by the enemies quite easily, which makes it not very secure to use.
Regardless, it’s one of the best spots to use this ultimate, so make sure to take advantage of it whenever you can. Even if it gets wallbanged, you’ll get plenty of opportunities to play off of the ultimate and stall the enemy from attacking the A Site.
If you want your ultimate to be in a completely safe spot, then consider placing it on A Top, where it can be pretty much impossible for the enemy to access without making themselves vulnerable to you or your teammates. This will also cover a lot of ground on the A Site, but it will keep a good portion of A Trees untouched and also keep A Main safe for the enemies as well.
So keep those in mind and make sure to clear out the areas mentioned or be aware of them as they’re the places in which the enemies might lurk as they wait for Killjoy’s ult duration to end.
C Site Lockdown (Attack)
Killjoy’s ultimate is arguably just as effective when you’re attacking, so it’s important to know the spots when your team is planting the spike as well. The first spot we’ll be taking a look at is on the C Site, near the right side of the entry.
This is a pretty basic spot for Killjoy’s ult but it’s extremely effective as the enemy can’t shoot it and it covers almost all of C Site, letting your team waltz in without any imminent danger.
B Site Lockdown (Attack)
Another simple and effective spot for the Lockdown is the one for B site, which is right before the entry to B Main, on the corner as shown in the image above. This covers all of B SIte and will let your team comfortably pass through the site, as long as there’s no enemy traps inside the site itself.
A Site Lockdown (Attack)
The best spot to put down your ultimate when attacking the A Site is on the corner near the ult orb. What a lot of people do not know, however, is that your Lockdown can be shot from Trees, even with a Vandal. So it’s not exactly the safest but it will still earn you plenty of time for your team to rush into the site.
This also doesn’t go all the way towards A Top and A Drop, so make sure to watch the high ground when entering the site, as those are the two places in which the enemies might be in.
And that covers our guide on Killjoy on Lotus, as we go through post plant and defense setups for all three sites, and take a look at the best ultimate spots on both retake and attack. This guide has almost everything you need to know to effectively play on Lotus as a Killjoy main, so we look forward to seeing you get some victories on this map with Valorant’s German super-scientist.



